14 580 USD

Concrete Mixer SG-750

15
kW, energy
750
l, volume
40
cycles per hour
2300
kg, weight

Concrete mixer SG 750 of a compulsory type with a horizontal rotor is suitable for the preparation of rigid concrete mixes, as well as other equipment by Stroytekhnika Plant, and combines compactness and functionality.

Advantages
Features
Сomposition

The advantages of the application include an introduction of the wear protective elements to the basic equipment of the mixing chamber.

Gravel, sand, gravel production screenings, expanded clay, slag, ash, sawdust, and any other loose materials in combination with astringent agents: cement and water, are easy to mix and form a homogeneous mass in the concrete mixer. This ensures that the output product meets the regulations of GOST.

More advantages of Concrete Mixer SG-750

Composition:

1.Concrete mixer SG-750
- Electric motor
- Control panel
- Rotor
- Removable protection of the mixer (installed in the mixing chamber)
- Removable blades of the mixer (installed on the carriers of the mixer rotor)
- Discharge hatch
- Gearbox

2.Set of batchers - Water batcher
- Aggregate batcher
- Cement batcher

Technical characteristics

Loadingvolume, m/cub	0.75
Number of operation cycles per hour, not less than	12
Aggregate fineness, no more than	15
Motor power of rotor drive, kW	15
Rotor speed, rpm	25

Features

The concrete mixer SG-750 has the following special features:

- The possibility of placing in a limited space while maintaining high volumes of output;

- The use of a cement batcher of a gravimetric type in combination with a batcher of a volumetric type for raw materials and water, which provide optimal loading amount of components for the future concrete mix of a given type of mix stiffness;

- High exit velocity of the prepared solution in comparison with other concrete mixers of the same volume of the container for mixing presented in the market;

- Short cycle time of mix production;;

- Necessity for a minimum number of personnel for the operation and maintenance of the mixer by semiautomatic usage mode..

Depending on customer requirements, there are various configuration options. Including the variant with an electronic programmable weigh batcher on the strain sensors Rifey-Ves (link)

Due to the small size, the mixer can be used both as a permanent installation and transported to a new place of work, its installation does not require special knowledge and training. All installation steps are described in detail in a carefully prepared operation manual. If necessary, you can always get qualitative consultation by a representative of the manufacturer – Stroytekhnika Plant.

We offer a flexible system of discounts and a long-term warranty.